You’re only seeing the surface.

Our most active car forums and technical guides are reserved for registered users.

Sign up here to get total access and start sharing your own ride.

Arched "A" Pilar Decoration.

The go-to spot for all non-technical car talk. Whether you’re discussing the latest EV tech or classic steel, park up and join the conversation.
Post Reply
ELDORADO4TRUCK
Posts: 49
Joined: Mon Feb 02, 2026 8:59 pm

Has anyone removed the top trim from the A-pillars to allow the cable to be routed behind? I plan to install a dash cam tomorrow. What are some suggestions? Be cautious to maintain a safe distance from the Air Bag.
MMCGARAGE
Posts: 55
Joined: Mon Feb 02, 2026 8:58 pm

Then I started to tuck it into the rubber trim. I ran the wire through the seam where the pillar trim meets the top.
ChristousPapous
Posts: 78
Joined: Mon Feb 02, 2026 9:00 pm

It might be necessary to direct it behind the airbag in the A-pillar as well. So that the bag doesn't snag the cable and/or camera and potentially shoot the passenger in the face, I've had to do this on prior vehicles.
TotalRecall4Cars
Posts: 57
Joined: Mon Feb 02, 2026 8:52 pm

I have not yet tested our EV3, but I did last Monday with Mrs. P's EV2.

Despite my best efforts, I was unable to remove the bottom of the driver's A-pillar from the dashboard.

Nevertheless, I was able to see clearly behind the air bag and proceeded to run the cable inside, against the windshield. To make sure it was completely out of the way, I threaded it under the airbag's base fixing. I could then run it under the dashboard trim and into the fuse box.
Post Reply