.png){kind=logo}
In the 2025 PHEV CX 70 PP, I saw that the manual may be adjusted to include an automatic tilt of the side mirror while shifting into reverse. I tried to enable the functionality by following the instructions, but it was unsuccessful. Whether anyone managed to activate the feature, I would very appreciate it. When you choose the seat memory, the manual also shows that the side mirrors settings are linked to the memory option. Each seat memory setting remained same, no matter how many times I tried moving the side mirrors.
This might be a software issue, or it could just not be compatible with the model and trim level I am using.
You’re only seeing the surface.
Our most active car forums and technical guides are reserved for registered users.
Sign up here to get total access and start sharing your own ride.
Our most active car forums and technical guides are reserved for registered users.
Sign up here to get total access and start sharing your own ride.
Features an automatic tilt feature and the ability to save side mirror settings for the 2025 CX 70 PP
The proper positioning of the mirror selector switch is frequently associated with the auto tilt and memory mirror capabilities. To activate auto tilt in reverse, adjust it to the left (driver's side) mirror. In order to save the mirror position in memory, you need to hold down the memory button until you hear a beep. That being said, if that still doesn't work, there is a known software issue with certain 2025s. For a module upgrade to resolve both concerns, it is probable that a dealer visit will be necessary.
-
AndrewGuidon67
- Posts: 44
- Joined: Mon Feb 02, 2026 8:44 pm
You have my gratitude for offering such feedback. Your recommendations are consistent with those in the Owners Manual, thus it's possible that I'm experiencing a software issue. In order to have my local dealer look into it, I will schedule an appointment with them.
-
tonysoprano
- Posts: 40
- Joined: Mon Feb 02, 2026 8:43 pm
A single mirror selection is required for tilt to function in reverse, as far as I can tell. Toggle the driver's side via the left button. For parallel parking, press the right button to tilt the passenger side.
-
AndrewGuidon67
- Posts: 44
- Joined: Mon Feb 02, 2026 8:44 pm
Even after attempting your advise, it remains untilted. I will contact the Mazda dealer as I assume it is a software problem.
-
tonysoprano
- Posts: 40
- Joined: Mon Feb 02, 2026 8:43 pm
That's something I've never done. Just keep in mind that you read somewhere about activating the tilt feature.