.png){kind=logo}
The front pads will likely require replacement before the next service/MOT on the old bus.
I figured I'd give the Evoque a new set of front tires as I've done it before on my LRs (Discovery 300tdi, TD5 D3, and RRS) and am not a fan of the rears due to the EPBs.
A fast search on their website reveals two disc sizes, 325 and 349mm, with pad thicknesses of 30 and 34mm, respectively; I had always thought Brembo to be decent gear.
Is it determined by a certain trim or specification (Dynamic?)? Has anybody tried this or knows?
While I wait, I will look for a video tutorial online.
You’re only seeing the surface.
Our most active car forums and technical guides are reserved for registered users.
Sign up here to get total access and start sharing your own ride.
Our most active car forums and technical guides are reserved for registered users.
Sign up here to get total access and start sharing your own ride.
Harness for 2019 L551 P200 HSE Front Brakes
-
ALJohns_34
- Posts: 38
- Joined: Mon Feb 02, 2026 8:39 pm
The 325 only rides on wheels that are 17 inches in diameter.
I assume you have the 349mm discs as yours is an HSE.
I assume you have the 349mm discs as yours is an HSE.
-
David_Collyer1981
- Posts: 31
- Joined: Mon Feb 02, 2026 8:44 pm
Great, I appreciate you getting back to me.
-
Imlach_C220
- Posts: 31
- Joined: Mon Feb 02, 2026 8:46 pm
If you remove the wheel and measure the diameter with a tape measure, you should be able to determine the size of the rotor because there is a discrepancy of 24mm.
Take the calliper and rotor off and measure it precisely if you're still unsure.
It is my hope that this is of assistance.
Take the calliper and rotor off and measure it precisely if you're still unsure.
It is my hope that this is of assistance.