You’re only seeing the surface.

Our most active car forums and technical guides are reserved for registered users.

Sign up here to get total access and start sharing your own ride.

Condensation in the W213 Headlights

The go-to spot for all non-technical car talk. Whether you’re discussing the latest EV tech or classic steel, park up and join the conversation.
Post Reply
Labusthetormentor
Posts: 35
Joined: Mon Feb 02, 2026 9:03 pm

Has this amount of condensation been seen before?
Even while this is apparently normal and mostly occurs when the weather is cooler, the current level of severity is unacceptable.
LiamTheGreat
Posts: 79
Joined: Mon Feb 02, 2026 8:35 pm

The air's moisture condenses on the cool glass since they are not sealed like double glazing units. Take it easy for a while or drive about on a dry day with the back cover off and the lights on to help dry it out. Warm days and chilly nights aren't helping matters right now. Condensation has been appearing on my windows at an increased rate for the past week, and I can relate.
Karlsdealership
Posts: 31
Joined: Mon Feb 02, 2026 8:43 pm

Puncture a tiny hole in the lamp's back to allow air to circulate and reach room temperature.
LiamTheGreat
Posts: 79
Joined: Mon Feb 02, 2026 8:35 pm

And that's exactly why most of them have ventilation.
IMINGAR55
Posts: 62
Joined: Mon Feb 02, 2026 8:47 pm

Covering the breather hole with this gore-tex-type fabric should be standard for most. The air should be able to pass through while the damp air is sealed off. Still, a lot of people deal with issues related to excessive humidity. I don't think cutting a hole would improve things; the current ventilation system should be sufficient.
IMINGAR55
Posts: 62
Joined: Mon Feb 02, 2026 8:47 pm

:) :) :) :)
Post Reply