Car Owners Hub UK - Built by Drivers, for Drivers

Greetings everyone!

This is certainly just an easy problem, but I was thinking you would assist me out anyhow.


My vehicle's i-activesense indication (defined in section 5-124 of the handbook) does not have a completely green circle. The front-side system status (2) and the rear-facing system status (5) are blank. Is this typical for my specific trim level of car?

I appear recall that this wasn't the case after the East Coast got extremely chilly. All I want to do is find out what the usual is. There isn't a vehicle on the lot with the same trim grade, therefore the dealer doesn't know and cannot confirm with another vehicle.

It is admired in advance.

I don't have the instruction manual handy, but since this is a second-hand vehicle, I'm thinking that under the settings we'll see that "you" (the previous owner) disabled the rear brake assist (the back center) and the front side indicators (blind aid?). Since I disabled lane assist and rear brake assist, the 9 and 3 o'clock positions, as well as the rear, do not have the yellow signal.

I checked but I failed to discover another option. Thank again.

Did you agreed about a trim?

Phev splendour

Found in the handbook:

system associated with the front
The systems detailed below correspond to those who are connected with the front end.


Front Collision Warning System (FCTA)
Automated Braking System (ABS) for Crossing the Road

Mechanism connected with the back
The system that follows is one that is connected to the back.

Automatic Reversing Sensing System (SBS)


What I know from the 2024 CX-90 "Specification Deck" is that none of those items are available on your trim level.

Your help is deeply valued.