Car Owners Hub UK - Built by Drivers, for Drivers

The front pads will likely require replacement before the next service/MOT on the old bus.
I figured I'd give the Evoque a new set of front tires as I've done it before on my LRs (Discovery 300tdi, TD5 D3, and RRS) and am not a fan of the rears due to the EPBs.
A fast search on their website reveals two disc sizes, 325 and 349mm, with pad thicknesses of 30 and 34mm, respectively; I had always thought Brembo to be decent gear.

Is it determined by a certain trim or specification (Dynamic?)? Has anybody tried this or knows?
While I wait, I will look for a video tutorial online.

The 325 only rides on wheels that are 17 inches in diameter.
I assume you have the 349mm discs as yours is an HSE.

Great, I appreciate you getting back to me.

If you remove the wheel and measure the diameter with a tape measure, you should be able to determine the size of the rotor because there is a discrepancy of 24mm.
Take the calliper and rotor off and measure it precisely if you're still unsure.
It is my hope that this is of assistance.

I must admit, I was slacking off.